Allen Water and Solids Filter Element

Allen Water and Solids Filter ElementAllen Water and Solids Filter Element
The Allen part number A30092-005 is a Water and Solids Filter Element (WS). Thiselement is designed to provide the services of two elements in one. Our waterabsorbing elements absorb water chemically and locks water in while at the sametime filtering out the particles. When an elements starts reaching its holding loadit begins to swell and cause an increase in the differential pressure.

Outside Diameter 6 in (15.2 cm)
Inside Diameter 2.5 in (6.4 cm)
Length 18 in (45.7 cm)
Weight 4.16 lb (1.89 kg)
Mean Efficiency 5 m
Maximum Temperature 240 deg F (115 deg C)
Flow Rate per Element 50 GPM (189.3 LPM)
Clean Pressure Drop 2-5 PSID (0.14-0.35 bar)
DP for Cartridge Change 20-25 PSI (1.4-1.7 bar) or 1 year, whichever one comes first.
Water Absorbing Capacity 0.46 gallons (1.75 liters) ***
*** Water capacity is based on inlet water concentration of less than 500 ppm, viscosity of 100 SSU, and flow rate of 5 GPM. Water holding capacity is affected by flow rate, viscosity, temperature, and water concentration.

Features
Meets ISO Specifications
High Efficiency
Pore Size 5 Microns
95% @ 5 micron on initial
Absolute @ 18 micron B > 75
Combination phenolic resinimpregnated media andpolymer impregnated media

Top